| rei_vilo |
| Spezialist |
| Olivier |
| Levallois - FRANCE |
|
|
| Männlich |
|
| Tuesday, November 01, 2005 |
| Friday, September 10, 2010 10:25:49 AM |
388
[0.85% aller Beiträge / 0.22 Beiträge pro Tag] |
|
Apart from the robot line and along with Oeco Power, the Technical Revolutions box is the most exciting box I've seen for a while from fischertechnik. It reminds me of the EC and EM boxes I used to play with 35 years ago.
This box covers a wide range of technical fields and offers an impressive number of 12 different models.
Pros
•Very didactic
• Excellent booklets, one for building instructions, the other for technical reference
Cons
• Some small parts
• Problem with the perpetual mobile
Wrap-up
• Highly recommended set
• “Play and learn” approach
• Parents and kids could play together
Check my review!
--- rei_vilo
France
sites.google.com/site/vilorei/fischertechnik
|
Bonsoir,
I had the same question when the Robo TX controller appeared.
After much thinking, I went for the Robo TX Training Lab:
• the cost difference is an extra 100 EUR (300 EUR instead of 200 EUR), but
• you get two encoder-motors and one mini-motor
• the encoder-motor is the real novelty of the Robo TX
• other components include lamps, photo-transistor, switches, path-seeker
• standard bricks are always welcomed 
Best regards, 
--- rei_vilo
France
sites.google.com/site/vilorei/fischertechnik
|
Bonsoir,
Try and change the parameters Procedure Minimum Number (here, 5) and Supplementary Procedures (here, 0) on the Properties tab shown below:
It may help!
Best regards,
--- rei_vilo
France
sites.google.com/site/vilorei/fischertechnik
|
@vleeuwen
Thank you for the explanations
--- rei_vilo
France
sites.google.com/site/vilorei/fischertechnik
|
Bonjour,
Actually, the direction of the motor (clockwise, counter-clockwise) is already known since it is managed by the TXC.
So incrementing the counter if the motor runs clockwise and decrementing the counter if the motor runs counter-clockwise could be performed by software.
Best regards,
--- rei_vilo
France
sites.google.com/site/vilorei/fischertechnik
|
Bonjour,
Former Intelligent Interface with LLWin software used to offer such a feature, incrementing or decrementing the counter based on the motor direction.
The new encoder-motor offers greater precision with its built-in and fast encoder. However, one-way counting featured by TXC is difficult to manage and prone to drift.
Reference (link): Error 09b: Trying Robo Pro 2.1.4.0 and Robo TX 1.18.02 Firmware
So I strongly back vleeuwen's demand for
Quote:a (software) black box that make the use of this encoder in relation with the fast counters possible. just as LLWin did.
Thank you and best regards,
--- rei_vilo
France
sites.google.com/site/vilorei/fischertechnik
|
Bonjour,
Please find the bluetooth user manual here
in German
in English
and the list of compatible devices.
--- rei_vilo
France
sites.google.com/site/vilorei/fischertechnik
|
Bonsoir,
Does the C-compiler include the Bluetooth radio communication libraries?
--- rei_vilo
France
sites.google.com/site/vilorei/fischertechnik
|
Bonjour Endlich,
Based on the details you provide, there are two options:
• hardware problem,
• software problem.
I suggest you to check first the hardware and O5, O6, O7 and O8 ouputs.
Prepare a basic program with only commands on and off for those ports and run it. Or run the interface test.
Then check whether TXC is responding correctly.
Does it work?
I case it works, hardware is fine. Now, consider the software.
Have now a close look at your project and check
• if 05 and 06 are confused with M3
• if 07 and 08 are confused with M4
It happened to me a lot of times.
I hope this could help you.
Best regards,
--- rei_vilo
France
sites.google.com/site/vilorei/fischertechnik
|
Bonjour,
Please find two updates:
• using railway wheels with rubber band, as suggested by Richard aka. rbudding
• refining the moving axis
--- rei_vilo
France
sites.google.com/site/vilorei/fischertechnik
|
|